Products
- Steel Round Bars[6]
- Flat Steel[6]
- Steel Sheets[6]
Contact Us
- Contact Person : Ms. Chen Elle
- Company Name : Huangshi Xinda Special Steel Co., Ltd.
- Tel : 86-714-6319053
- Address : Hubei,Huangshi,No.651, Huangshi Road(20th floor, Wei Yisheng Square)
- Country/Region : China
- Zip : 435000
1.2363 Alloy Steel Flat Bar
Product Detailed
Related Categories:Steel Sheets
Related Product Searches:1.2363 Alloy Steel Flat Bar,High Quality 1.2363,1.2363 DIN 1.2363
1.2363 steel flats
1.Dimension:10~400mmX50-1200mm
2.Delivery Conditon:annealed, black/milled surface
3.Short Delivery Time
Related Product Searches:1.2363 Alloy Steel Flat Bar,High Quality 1.2363,1.2363 DIN 1.2363
| 1.2363 steel flats | |||||||
| Chemical Composition(%) | |||||||
| C | Si | Mn | P | S | Cr | Mo | V |
| 0.90-1.05 | 0.20-0.40 | 0.40-0.70 | ≤0.035 | ≤0.035 | 4.80-5.50 | 0.90-1.20 | 0.10-0.30 |
| Specialty | |||||||
1.Good machinability and abrasivity, the life for processing tools is longer than SKD11, and the process time is shorter than SKD11. | |||||||
2.Advantage on heat treatment: the quenching hardenability is higher than SKD11, can improve the defect of unenough hardness in the process of vacuum degassing. | |||||||
| 3.Advantage on wire cutting: mitigate the residual stress and elimilate the retained Austenite through high temperature tempering, pretend the wire cutting process from cracking and deform. | |||||||
| 4.Advantage on surface hardening treatment: the surface hardness is higher than SKD11 after surface hardening treatment in order to improve the mold performance. | |||||||
| 5.Advantage on repair welding job: the repair welding job is much more simple because the temperature of preheating and heating is lower than SKD11, | |||||||
| Use | |||||||
| 1.Precision Stamping Dies | |||||||
| 2.Precison Blanking Dies of wire cutting process, and stamping dies for various uses | |||||||
| 3.Tools for plactic deformation of hard processing material | |||||||
| 4.Dies for forging, deep drawing and thread rolling | |||||||
| 5.High speed blanking punch,stainless plates punch | |||||||
| 6.Tensile modulus, crimping die, embossing dies, wear plastic molding mold | |||||||
| Heat Treatment | |||||||
| 1.Quench: 940-960°c oil cooling | |||||||
| 2.Tempering temperature: 210~240 °c | |||||||
| 3. Hardness: 61HRC | |||||||
| Melting Process | |||||||
| 1. EAF: Electric Furnace+LF+VD(Optional) | |||||||
| 2. ESR: Electric Furnace+LF+VD+Eleroslag Remelted(Optional) | |||||||
| UT Class | |||||||
| According to Standard of SEP 1921/84,100% Volume, Level C/c, D/d or E/e | |||||||
| Tolerance on Quantity | |||||||
| +/-10% Per Size | |||||||
